Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Highland Park?
Spring replacement in Highland Park typically costs $180 – $340 for one spring. Because torsion springs are usually replaced as a matched pair, a pair runs about twice that, roughly $360 – $680. Those are typical estimates for the Highland Park market in 2026 – the written estimate you get on site sets the final price, and it’s free.
We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday, so a spring that lets go on a Sunday morning gets handled the same day in most cases. Our technicians have up to 15 years of experience, and spring work is a core service for us rather than something we hand off.
Key Takeaways
- One spring: $180 – $340. A matched pair: about $360 – $680.
- Torsion springs fail as a set more often than not, so budget for the pair.
- Repair-first approach: we replace the spring, the cables and the bearings that are worn, not the whole door.
- Free estimates, and the written estimate is the price.
- We work on eight major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers usually stack up for a residential job in Highland Park. These are typical estimated ranges, not quotes – the actual figure depends on the door, the spring type and what we find once the door is opened up.
| Line item | Typical estimated range |
|---|---|
| Spring repair (one spring) | $180 – $340 |
| Matched pair of springs | About $360 – $680 |
| Cable repair (often paired with spring work) | $130 – $250 |
| Roller replacement | $110 – $220 |
| Track realignment | $120 – $240 |
| Panel replacement | $250 – $500 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Full garage door repair (broader job) | $150 – $600 |
| New door installation (if the door is past saving) | $700 – $2200 |
Most spring jobs land in the lower half of that table. The single spring replacement sits at $180 – $340, and that’s the number to hold in your head. A pair doubles it because the springs are matched to the door’s weight and replaced together – putting one fresh spring next to an old one leaves the door unbalanced and shortens the life of both. If the cables are worn or frayed, they get replaced at the same time, and that pushes a typical job into the $310 – $590 range for a pair plus cables.
What moves the price up: heavier doors, high-lift or unusual track configurations, extension springs versus torsion springs on older doors, and rusted or seized hardware that has to be cut out. What moves it down: a straightforward standard torsion setup where the springs come off cleanly and the cables are still sound.
Spring Repair vs. Spring Replacement
Sometimes a spring can be adjusted or re-tensioned rather than replaced, and that falls at the low end of the $180 – $340 range. But a broken spring is broken – it can’t be repaired, only replaced. When a technician opens the door and finds a snapped coil, the quote is for replacement, full stop. We’d rather tell you that plainly than sell you a “repair” that doesn’t fix anything.
If you’re weighing up whether to fix the spring or the whole assembly, our page on spring replacement walks through the difference between the two and what each involves.
What Affects Spring Replacement Pricing in Highland Park
Highland Park is an older, established neighborhood, and that shapes the work here more than people expect. Houses in this part of St. Paul tend to have garages that were built decades before anyone worried about matched spring pairs, so we see a lot of retrofit situations. Here’s what actually moves the number.
- Spring type and age of the door. Older doors in Highland Park often run extension springs along the sides of the track rather than torsion springs above the header. Extension conversion is a different job from a straight torsion replacement, and the price can land anywhere in the $180 – $340 range depending on what’s involved.
- Matched pair versus single. As above, a pair costs about twice a single. On any door with two springs, we strongly recommend replacing both – the door is weighted for a matched set.
- Cables and bearings found worn. Springs and cables age together. If the cables are frayed or the center bearing is grinding, it gets added to the job at $130 – $250 for the cable work. Doing it all in one visit saves a second call-out.
- Freezing and thawing. Highland Park winters swing hard between freeze and thaw, and that cycle works on metal. Cold makes springs more brittle and more likely to snap, and moisture around the bottom seal and track can leave hardware rusted enough that bolts need to be cut rather than turned. That adds labor to an otherwise simple spring swap.
- Garage ceiling height and access. Older Highland Park garages sometimes have low headroom or a finished ceiling right above the torsion bar. Tight access adds time, and time is part of the estimate.
- Brand and door weight. A heavy insulated Clopay or Amarr door needs a heavier spring than a basic uninsulated panel door. We work on all of these, so we size the spring to the door rather than guessing.
One thing that doesn’t affect the price: how urgent it is. A spring that breaks at 6am and a spring that breaks at 3pm cost the same to replace. The written estimate sets the price, and a call outside dispatch hours is simply booked into the next opening.
How to Save on Spring Replacement
A few practical moves keep the bill at the lower end of the range without cutting corners on safety.
- Replace both springs at once. It feels like spending more, but one visit for a pair costs less than two separate single-spring visits, and you avoid the second breakdown entirely.
- Bundle worn parts into the same visit. If the rollers are shot or the track is out of line, adding it to the spring job at $110 – $220 for rollers and $120 – $240 for realignment is cheaper than booking a second appointment.
- Get the estimate in writing before work starts. Our estimates are free, and the written number is the number. If someone quotes you a range on the phone and then adds items on site without your say-so, walk away.
- Don’t buy the cheapest spring. A spring rated for fewer cycles will fail sooner, and you’ll be paying the $180 – $340 again within a couple of years. Ask what cycle rating the spring carries.
- Fix the opener separately if it’s still working. If the opener is fine, leave it alone. If it’s struggling, opener repair runs $120 – $320 and can usually be handled on the same visit.
- Have the door serviced before winter. A lubricated, balanced door puts less stress on the spring. That’s cheap insurance against a mid-January snap.
If you want a firm number, call (855) 710-4739. We’ll walk you through what to expect and book an estimate that works around your day.
A Note on Safety
Garage door springs store an enormous amount of energy, and both torsion and extension springs can cause serious injury if they release unexpectedly. This isn’t a job to attempt with hand tools and a video tutorial. Our technicians have up to 15 years of experience and treat spring work with the respect it demands. If you’re looking at a broken spring, leave the door closed and call us rather than trying to lift it by hand.
We handle the full system – springs, cables, tracks, panels and openers – so you’re not juggling three different trades. For broader work beyond the spring, our Highland Park Garage Door Repair Pros team covers everything from a single broken panel to a full new installation.
Frequently Asked Questions
How much does spring replacement cost in Highland Park?
Spring replacement in Highland Park typically costs $180 – $340 for one spring, or about $360 – $680 for a matched pair. The written estimate sets the final price, and estimates are free. Call (855) 710-4739 for an exact quote on your door.
Is it cheaper to repair or replace a garage door spring?
Replacement is the only option for a broken spring, and it costs $180 – $340 per spring. A “repair” that just adjusts tension is only possible on a spring that’s still intact. Replacing the door itself runs $700 – $2200 and is almost never necessary just because a spring broke. Call (855) 710-4739 and we’ll tell you honestly which one you’re facing.
Can you replace a garage door spring the same day?
Yes, in most cases. Same-day service is standard for us, and with dispatch from 7am to 7pm, Sunday through Friday, a call in the morning usually gets a technician out the same day. We answer 24/7. Call (855) 710-4739 to check availability.
Do I need to replace both springs if only one is broken?
Yes, in almost every case. A matched pair costs about twice a single spring, roughly $360 – $680 versus $180 – $340. The springs are matched to the door’s weight, and mixing a new spring with a worn one leaves the door unbalanced. Call (855) 710-4739 to book a pair replacement.
What’s included in a spring replacement estimate?
The estimate covers labor and the spring itself, and the written number is the price. Related parts like cables ($130 – $250) or rollers ($110 – $220) are quoted separately and only if they need replacing. Estimates are free, so call (855) 710-4739 to schedule one.
Does cold weather affect garage door spring costs in Highland Park?
Not the price, but it affects the timing. Cold makes springs more brittle, and freeze-thaw cycles work on metal, so springs fail more often in winter. When that happens the replacement still runs $180 – $340 per spring, and the written estimate sets the price. Call (855) 710-4739 if your door has stopped lifting.
Get a Free Estimate
If your door won’t lift, the opener is straining, or you heard a bang from the garage, it’s most likely a spring. We answer 24/7, dispatch from 7am to 7pm Sunday through Friday, and we’ll give you a free estimate before any work starts. We work on the brands you already own – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor – and we repair before we recommend replacing. Call (855) 710-4739 to get your free estimate today.
Pricing reflects the Highland Park market as of 2026. Highland Park Garage Door Repair Pros offers free estimates – call (855) 710-4739.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Jennifer Delaney"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Allison Thompson"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Tim Whitaker